Independent aftermarket replacement blades
DOPPSTADT METHOR BLADES.
Aftermarket rotor teeth / chisel teeth for selected Doppstadt Methor configurations—manufactured to the verified blade drawing, sample or measured geometry.
Model compatibility data
Choose the machine configuration.
The same model may use different knife sizes, cutter counts, or rotor versions. Use this table to identify the closest published configuration, then confirm the physical part.
| Configuration | Cutting part | Published specification | Quantity | OEM part / companion tool | Supply route |
|---|---|---|---|---|---|
| SPublished specification | Rotor teeth / chisel teethroller tooth / chisel tooth | rotor diameter 800 mm; cutting depth / note 60 | 36 | Not published in verified OEM referencesCounter blade V1 / V2 / V3 / U1 (select by feedstock) | Custom-made to published specification |
| MPublished specification | Rotor teeth / chisel teethroller tooth / chisel tooth | rotor diameter 800 mm; cutting depth / note 100 | 26 | Not published in verified OEM referencesCounter blade V1 / V2 / V3 / U1 (select by feedstock) | Custom-made to published specification |
| LPublished specification | Rotor teeth / chisel teethroller tooth / chisel tooth | rotor diameter 600 mm; cutting depth / note 174 / 150 / 130 | 8 | Not published in verified OEM referencesCounter blade V1 / V2 / V3 / U1 (select by feedstock) | Custom-made to published specification |
| Coarse chisel toothPublished specification | Rotor teeth / chisel teethroller tooth / chisel tooth | rotor diameter 600 mm; cutting depth / note head diameter 14.8 | 25 | Not published in verified OEM referencesCounter blade V1 / V2 / V3 / U1 (select by feedstock) | Custom-made to published specification |
| Fine chisel toothDrawing/sample required | Rotor teeth / chisel teethroller tooth / chisel tooth | rotor diameter 600 mm; cutting depth / note exact dimensions require verification | 39 | Not published in verified OEM referencesCounter blade V1 / V2 / V3 / U1 (select by feedstock) | Non-standard custom manufacturing from blade photos or engineering drawings |
Before quotation
Confirm the blade—not only the machine badge.
- Machine identity
Doppstadt Methor, serial range if available - Blade position
Rotor knife, counter knife, cutter disc, tooth or spacer - Critical dimensions
Length, width, thickness, bore/hole pattern and hook profile - Operating details
Feedstock, contamination, output size and quantity
Doppstadt and Methor identify compatibility only. This site is not affiliated with, sponsored by, or endorsed by the original equipment manufacturer.
Buying questions
Doppstadt Methor blade FAQ.
The model is the starting point. Geometry verification protects both fit and quotation accuracy.
Can I order Doppstadt Methor blades using only the machine model?
The model number narrows the cutting system, but it is not enough for production. Confirm the blade dimensions, bore or hole pattern, edge geometry and quantity from a drawing, sample or clear photos.
Are these original Doppstadt parts?
No. They are independent aftermarket replacement parts intended for compatible Doppstadt Methor applications after dimensional verification.
What information is needed for a quotation?
If no blade model is available, send clear photos of both faces, the edge and hole pattern. Add the machine brand, dimensions, material being shredded, quantity, drawing or sample when available.
Which cutting parts are associated with this Methor page?
The current published reference covers rotor teeth / chisel teeth. The exact part still depends on the installed rotor or cutter configuration.
Related machine models