Independent aftermarket replacement blades
DOPPSTADT INVENTHOR 9 BLADES.
Aftermarket rotor teeth / cutting tools for selected Doppstadt Inventhor 9 configurations—manufactured to the verified blade drawing, sample or measured geometry.
Model compatibility data
Choose the machine configuration.
The same model may use different knife sizes, cutter counts, or rotor versions. Use this table to identify the closest published configuration, then confirm the physical part.
| Configuration | Cutting part | Published specification | Quantity | OEM part / companion tool | Supply route |
|---|---|---|---|---|---|
| XLPublished specification | Rotor teeth / cutting toolstooth / tool | Tooth depth 170 mm; rotor diameter 600 mm | 28 | Not published in verified OEM referencesLimiter / tooth strip (match the XL, L or M tooth package) | Custom-made to published specification |
| LPublished specification | Rotor teeth / cutting toolstooth / tool | Tooth depth 174 mm; rotor diameter 600 mm | 21 / 42 | Not published in verified OEM referencesLimiter / tooth strip (match the XL, L or M tooth package) | Custom-made to published specification |
| MPublished specification | Rotor teeth / cutting toolstooth / tool | Tooth depth 100 mm; rotor diameter 800 mm | 100 | Not published in verified OEM referencesLimiter / tooth strip (match the XL, L or M tooth package) | Custom-made to published specification |
Before quotation
Confirm the blade—not only the machine badge.
- Machine identity
Doppstadt Inventhor 9, serial range if available - Blade position
Rotor knife, counter knife, cutter disc, tooth or spacer - Critical dimensions
Length, width, thickness, bore/hole pattern and hook profile - Operating details
Feedstock, contamination, output size and quantity
Published machine reference
- Rotor diameter600 / 800 mm
- Rotor length3000 mm
Doppstadt and Inventhor 9 identify compatibility only. This site is not affiliated with, sponsored by, or endorsed by the original equipment manufacturer.
Buying questions
Doppstadt Inventhor 9 blade FAQ.
The model is the starting point. Geometry verification protects both fit and quotation accuracy.
Can I order Doppstadt Inventhor 9 blades using only the machine model?
The model number narrows the cutting system, but it is not enough for production. Confirm the blade dimensions, bore or hole pattern, edge geometry and quantity from a drawing, sample or clear photos.
Are these original Doppstadt parts?
No. They are independent aftermarket replacement parts intended for compatible Doppstadt Inventhor 9 applications after dimensional verification.
What information is needed for a quotation?
If no blade model is available, send clear photos of both faces, the edge and hole pattern. Add the machine brand, dimensions, material being shredded, quantity, drawing or sample when available.
Which cutting parts are associated with this Inventhor 9 page?
The current published reference covers rotor teeth / cutting tools. The exact part still depends on the installed rotor or cutter configuration.
Related machine models