Independent aftermarket replacement blades
FOR REC FX8000S BLADES.
Aftermarket sector blades / cutter discs for selected FOR REC FX8000S configurations—manufactured to the verified blade drawing, sample or measured geometry.
Model compatibility data
Choose the machine configuration.
The same model may use different knife sizes, cutter counts, or rotor versions. Use this table to identify the closest published configuration, then confirm the physical part.
| Configuration | Cutting part | Published specification | Quantity | OEM part / companion tool | Supply route |
|---|---|---|---|---|---|
| Sector bladesPublished specification | Sector blades / cutter discssector blade | Thickness 200 mm | Confirm | Not published in verified OEM referencesSpacer / counter component (confirm from shaft assembly drawing) | Custom-made to published specification |
Before quotation
Confirm the blade—not only the machine badge.
- Machine identity
FOR REC FX8000S, serial range if available - Blade position
Rotor knife, counter knife, cutter disc, tooth or spacer - Critical dimensions
Length, width, thickness, bore/hole pattern and hook profile - Operating details
Feedstock, contamination, output size and quantity
Published machine reference
- Machine dimensionsConfirm from nameplate / manual
FOR REC and FX8000S identify compatibility only. This site is not affiliated with, sponsored by, or endorsed by the original equipment manufacturer.
Buying questions
FOR REC FX8000S blade FAQ.
The model is the starting point. Geometry verification protects both fit and quotation accuracy.
Can I order FOR REC FX8000S blades using only the machine model?
The model number narrows the cutting system, but it is not enough for production. Confirm the blade dimensions, bore or hole pattern, edge geometry and quantity from a drawing, sample or clear photos.
Are these original FOR REC parts?
No. They are independent aftermarket replacement parts intended for compatible FOR REC FX8000S applications after dimensional verification.
What information is needed for a quotation?
If no blade model is available, send clear photos of both faces, the edge and hole pattern. Add the machine brand, dimensions, material being shredded, quantity, drawing or sample when available.
Which cutting parts are associated with this FX8000S page?
The current published reference covers sector blades / cutter discs. The exact part still depends on the installed rotor or cutter configuration.
Related machine models