Independent aftermarket replacement blades
ELDAN RECYCLING SC2118-II BLADES.
Aftermarket flying knives / static knives for selected ELDAN Recycling SC2118-II configurations—manufactured to the verified blade drawing, sample or measured geometry.
Model compatibility data
Choose the machine configuration.
The same model may use different knife sizes, cutter counts, or rotor versions. Use this table to identify the closest published configuration, then confirm the physical part.
| Configuration | Cutting part | Published specification | Quantity | OEM part / companion tool | Supply route |
|---|---|---|---|---|---|
| Flying + static knivesModel-level reference | Flying knives / static knivesflying knife / static knife | Individual knife dimensions not published | flying 36 / static 20 | Not published in verified OEM referencesStatic knife (verify as a set with the flying knife) | Non-standard custom manufacturing from blade photos or engineering drawings |
Before quotation
Confirm the blade—not only the machine badge.
- Machine identity
ELDAN Recycling SC2118-II, serial range if available - Blade position
Rotor knife, counter knife, cutter disc, tooth or spacer - Critical dimensions
Length, width, thickness, bore/hole pattern and hook profile - Operating details
Feedstock, contamination, output size and quantity
Published machine reference
- Rotor length2100 mm
- Rotor speed0–21 rpm
ELDAN Recycling and SC2118-II identify compatibility only. This site is not affiliated with, sponsored by, or endorsed by the original equipment manufacturer.
Buying questions
ELDAN Recycling SC2118-II blade FAQ.
The model is the starting point. Geometry verification protects both fit and quotation accuracy.
Can I order ELDAN Recycling SC2118-II blades using only the machine model?
The model number narrows the cutting system, but it is not enough for production. Confirm the blade dimensions, bore or hole pattern, edge geometry and quantity from a drawing, sample or clear photos.
Are these original ELDAN Recycling parts?
No. They are independent aftermarket replacement parts intended for compatible ELDAN Recycling SC2118-II applications after dimensional verification.
What information is needed for a quotation?
If no blade model is available, send clear photos of both faces, the edge and hole pattern. Add the machine brand, dimensions, material being shredded, quantity, drawing or sample when available.
Which cutting parts are associated with this SC2118-II page?
The current published reference covers flying knives / static knives. The exact part still depends on the installed rotor or cutter configuration.
Related machine models